Sheet E-001 / Residential electrical, Los Gatos

Wired right. Drawn first.

EV chargers, panel upgrades and lighting for homes in Los Gatos and the hills around it. We draw every job before we cut a single hole, so you see the plan and the price first.

(408) 555-0139

Office Mon to Fri, 7am to 5pm. Emergency calls answered 24/7.

Section A-A / Scale NTSStop 1 of 4: panel
Drawing layers
1Stop 1 of 4

It starts at the panel.

Every circuit in your house leaves from one box in the garage or on the side wall. Before we quote anything, we open it, count spaces, read the main breaker and check for the brands and wiring that inspectors flag.

  • Main breaker size and spare spaces
  • Grounding, bonding and the meter base
  • Double taps and scorched lugs
2Stop 2 of 4

Kitchen and lighting.

Kitchens need their own 20 amp counter circuits, GFCI protection near water, and lights you can actually cook under. We lay out recessed cans, pendants and under cabinet strips on a ceiling plan, then put each layer on its own dimmer.

See how we plan lighting

3Stop 3 of 4

The charger in the garage.

A Level 2 charger is one dedicated circuit, but the size of that circuit depends on what your panel can spare. We measure the run, check the load, and tell you if a 40 or 48 amp charger fits without an upgrade.

EV charger installs, start to finish

4Stop 4 of 4

The whole house, on backup.

When the power drops, a battery or generator keeps the circuits you choose running: fridge, lights, Wi-Fi, the well pump if you have one. We size it to what you actually use, not to the biggest box on the shelf.

Batteries, generators and transfer switches

The panel schedule.

Six kinds of work, one crew. Pick a breaker to open its sheet.

A two storey house at dusk with a lit window, a white wall mounted box by the entry and a closed garage door
Photo 1: Sample photo. A front elevation at dusk, the kind of exterior we light.

What will an EV charger cost?

Tell us your panel, the charger and how far the wire has to go. The sheet shows the math line by line, the same rates we quote from.

1. Main panel size
2. Charger
3. Wire run
5 ft150 ft
4. Route
5. Big loads already on the panel
Calc sheet E-101.1Estimate only
$1,100 to $1,650 Your 200A panel likely has room: about 140A of headroom for a 50A breaker.
Line by line
Base install: breaker, first 10 ft, mounting, testing$650 to $900
20 ft beyond 10, surface conduit at $14 to $20$280 to $400
Permit and inspection$180 to $350
Total, each end rounded to $25$1,100 to $1,650

Charger hardware is not included: $450 to $700 is typical.

This is an estimate, not a load calculation. We do the real load calc on site, per the electrical code, before we quote.

Emergency line, 24/7

Burning smell, a buzzing panel, a breaker that will not reset, or a wire down in the yard. Do not wait for Monday.

(408) 555-0139

Signed off by the people who live there.

Sample reviews for this demo, written the way our customers talk.

Inspection tag 0412EV charger

Pass / 5 of 5

They showed me a drawing of the run from the panel to the garage before anyone touched a wall. Charger was working by 2pm the same day.

Dana R.Los Gatos, sample review

Inspection tag 0398Panel upgrade

Pass / 5 of 5

Our old panel was full and warm to the touch. They handled the utility shutoff, the permit and the inspector. Power was off about six hours.

Priya S.Monte Sereno, sample review

Inspection tag 0377Lighting

Pass / 5 of 5

Twelve recessed lights and three pendants in a kitchen with a plaster ceiling. They patched every hole and you cannot find a single one.

Tom and JessCampbell, sample review

Send us the job.

Tell us what you are thinking about. A licensed electrician, not a call center, calls you back to set up a site visit.

  1. 1

    We call you back

    Same business day, usually within two hours.

  2. 2

    We visit and draw it

    About 45 minutes on site. You get a drawing of the work.

  3. 3

    You get a fixed price

    In writing, within two days. It does not change unless the job does.

(408) 555-0139

Phone or email, whichever you check.

We call back the same business day. Sparks, smoke or a hot panel? Skip the form and call (408) 555-0139. If there is smoke or heat, call 911 and leave first.